Abstract Simulating a bacterial-induced pulpitis environment in vitro may contribute to exploring mechanisms and bioactive molecules to counteract these adverse effects. Objective To investigate the chronic exposure of human dental pulp cells (HDPCs) to lipopolysaccharides (LPS) aiming to establish a cell culture protocol to simulate the impaired odontogenic potential under pulpitis conditions. Methodology HDPCs were isolated from four healthy molars of different donors and seeded in culture plates in a growth medium. After 24 h, the medium was changed to an odontogenic differentiation medium (DM) supplemented or not with E. coli LPS (0 - control, 0.1, 1, or 10 µg/mL) (n=8). The medium was renewed every two days for up to seven days, then replaced with LPS-free DM for up to 21 days. The activation of NF-κB and F-actin expression were assessed (immunofluorescence) after one and seven days. On day 7, cells were evaluated for both the gene expression (RT-qPCR) of odontogenic markers (COL1A1, ALPL, DSPP, and DMP1) and cytokines (TNF, IL1B, IL8, and IL6) and the production of reactive nitrogen (Griess) and oxygen species (Carboxy-H2DCFDA). Cell viability (alamarBlue) was evaluated weekly, and mineralization was assessed (Alizarin Red) at 14 and 21 days. Data were analyzed with ANOVA and post-hoc tests (α=5%). Results After one and seven days of exposure to LPS, NF-κB was activated in a dose-dependent fashion. LPS at 1 and 10 µg/mL concentrations down-regulated the gene expression of odontogenic markers and up-regulated cytokines. LPS at 10 µg/mL increased both the production of reactive nitrogen and oxygen species. LPS decreased cell viability seven days after the end of exposure. LPS at 1 and 10 µg/mL decreased hDPCs mineralization in a dose-dependent fashion. Conclusion The exposure to 10 µg/mL LPS for seven days creates an inflammatory environment that is able to impair by more than half the odontogenic potential of HDPCs in vitro, simulating a pulpitis-like condition.

Abstract Potent signaling agents stimulate and guide pulp tissue regeneration, especially in endodontic treatment of teeth with incomplete root formation. Objective This study evaluated the bioactive properties of low concentrations of extracellular matrix proteins on human apical papilla cells (hAPCs). Methodology Different concentrations (1, 5, and 10 µg/mL) of fibronectin (FN), laminin (LM), and type I collagen (COL) were applied to the bottom of non-treated wells of sterilized 96-well plates. Non-treated and pre-treated wells were used as negative (NC) and positive (PC) controls. After seeding the hAPCs (5×103 cells/well) on the different substrates, we assessed the following parameters: adhesion, proliferation, spreading, total collagen/type I collagen synthesis and gene expression (ITGA5, ITGAV, COL1A1, COL3A1) (ANOVA/Tukey; α=0.05). Results We observed greater attachment potential for cells on the FN substrate, with the effect depending on concentration. Concentrations of 5 and 10 µg/mL of FN yielded the highest cell proliferation, spreading and collagen synthesis values with 10 µg/mL concentration increasing the ITGA5, ITGAV, and COL1A1 expression compared with PC. LM (5 and 10 µg/mL) showed higher bioactivity values than NC, but those were lower than PC, and COL showed no bioactivity at all. Conclusion We conclude that FN at 10 µg/mL concentration exerted the most intense bioactive effects on hAPCs.

Resumo O objetivo deste estudo foi o desenvolvimento de um recobrimento de vidro bioativo sobre a zircônia (Zr) para modular o fenótipo de fibroblastos gengivais. Para este propósito, partículas de Biosilicato® (6 mg/mL) em um veículo a base de água/álcool isopropílico (1:1) foram aplicadas sobre discos de zircônia seguido por tratamento térmico a 1100 °C por 20 min. A topografia de superfície (MEV), composição química (EDX), rugosidade de supefície (Ra; microscopia confocal), energia livre de superfície (goniômetro) e alteração de cor (Espectrofotometria UV-vis) foram avaliadas (n=6). A seguir, fibroblastos L929 foram semeados sobre discos de Zr e BS+Zr e a proliferação (Alamar Blue; n=6), morfologia (MEV; n=2), migração celular (wound healing; n=4) e a síntese de colágeno (Sirius Red; n=6) foram avaliados até 7 dias. Os dados foram analisados pelos testes ANOVA/Tukey (a=5%). Um recobrimento homogêneo consistindo de Si, Na, O e Ca foi detectado na superfície da Zr após o tratamento térmico com BS, o qual promoveu um aumento significante na rugosidade e energia livre de superfície (p<0,05). Nenhuma mudança nos parâmetros de cor foi observada (p>0,05). Células semeadas na superfície de Zr+BS apresentaram maior proliferação, expressão de colágeno e capacidade de migração em comparação com aquelas cultivadas sobre a superfície de Zr (p<0,05). Imagens de MEV revelaram que o espalhamento celular ocorreu mais rápido na presença de BS. Assim, conclui-se que o tratamento térmico da superfície da Zr com BS levou a deposição de um recobrimento bioativo, o qual induziu in vitro o espalhamento, proliferação e migração de fibroblastos gengivais e expressão de colágeno.

Abstract The objective of this study was the development of a bioactive glass coating on zirconia (Zr) to modulate the gingival fibroblast phenotype. For this purpose, Biosilicate® (BS) particles in a water/isopropyl alcohol (1:1) vehicle (6 mg/mL) were applied to zirconia discs followed by thermal treatment at 1100 °C for 20 min. The surface topography (SEM), chemical composition (EDX), surface roughness (Ra; confocal microscopy), surface free energy (goniometry), and color alteration (UV-vis spectrophotometry) were assessed (n=6). Thereafter, L929 fibroblasts were seeded onto Zr and Zr+BS discs, and cell proliferation (Alamar Blue; n=6), morphology (SEM; n=2), migration (wound healing; n=4), and collagen synthesis (Sirius Red; n=6) were evaluated up to 7 days. Data were analyzed by ANOVA/Tukey tests (a=5%). A homogeneous coating consisting of Si, Na, O, and Ca was detected on the Zr surface after thermal treatment with BS, which led to a significant increase in surface roughness and free energy (p<0.05). No change in color parameters was observed (p>0.05). Cells seeded on the Zr+BS surface featured increased proliferation, collagen expression, and migration capability in comparison with those cultured on plain Zr (p<0.05). SEM images revealed that cell spreading occurred faster in the presence of BS. Therefore, it was concluded that thermal treatment of the Zr surface with BS led to the deposition of a bioactive coating, which induced gingival fibroblast spread, proliferation, migration, and collagen expression in vitro.

Resumo Este estudo avaliou o protocolo de aplicação (convencional/ER e autocondicionante/SE) e o grau de umidade da dentina (úmida e seca) sobre a resistência de união à microtração (μTBS) e a citotoxicidade transdentinária do sistema adesivo ScotchbondTM Universal (SU). Os valores de μTBS e o modo de fratura foram registrados 24 h após aplicação do sistema adesivo e restauração com resina composta pela técnica incremental. Para avaliação da citotoxicidade transdentinária, células odontoblastóides MDPC-23 foram semeadas na face pulpar de discos de dentina (0,4 mm de espessura) adaptados a câmaras pulpares artificiais (n = 8). O sistema adesivo foi aplicado na superfície oclusal, seguido de incubação por 24 h. A viabilidade e morfologia celular foram avaliadas pelo teste de Alamar Blue e MEV, respectivamente. Adper Single Bond 2 e Clearfil SE Bond foram utilizados como controle positivo do protocolo de aplicação ER e SE, respectivamente. Nenhum tratamento foi realizado no grupo controle negativo (NC). Os dados foram analisados pelos testes de ANOVA e Tukey (α = 5%). Maiores valores de μTBS foram encontrados para o modo ER em comparação com o protocolo SE (p < 0,05). O grau de umidade da dentina não apresentou efeito na resistência de união do SU em ambos os protocolos ER e SE (p > 0.05). A maioria das fraturas envolveu a camada híbrida e / ou camada adesiva. Ambas as variáveis não preveniram o intenso efeito citotóxico dos sistemas adesivos sobre as células MDPC-23 em cultura, uma vez que redução intensa na viabilidade celular (± 88%) e alterações severas na morfologia celular foram observadas para todos os grupos quando comparados ao NC, sem diferenças entre eles (p > 0.05). Desta forma, foi concluído que a aplicação do SU seguindo o protocolo ER apresentou melhor performance adesiva. No entanto, esse sistema adesivo promoveu intensa citotoxicidade transdentinária sobre células pulpares, independente do protocolo de aplicação e grau de umidade dentinária.

Abstract This study evaluated application protocol (etch-and-rinse/ER and self-etching/SE) and dentin wettability (wet and dry) on microtensile bond strength (μTBS) and transdentinal cytotoxicity of ScotchbondTM Universal (SU) adhesive system. The μTBS values and fracture mode were registered 24 h after adhesive system application and resin composite block build-up (n=5). For analysis of transdentinal cytotoxicity, odontoblast-like MDPC-23 cells were seeded on pulpal surface of dentin discs (0.4 mm thick) adapted to artificial pulp chambers (n=8). The adhesive system was applied to occlusal surface, followed by 24-h incubation time. Cell viability (Alamar Blue) and morphology (SEM) were assessed. Adper Single Bond 2 and Clearfil SE Bond were used as positive controls of the ER and SE application protocols, respectively. No treatment was performed on negative control (NC) group. Data were analyzed by ANOVA and Tukey’s tests (α=5%). Higher μTBS values were found for ER mode in comparison with SE protocol (p<0.05). Dentin wettability had no effect on bond strength of SU in both the ER and SE techniques (p>0.05). Most fractures involved hybrid layer and/or adhesive layer. Neither variable prevented the intense toxic effects of adhesive systems on MDPC-23 cultured cells, since intense reduction in cell viability (±88%) and severe alterations in cell morphology were observed for all groups compared to NC, with no differences among them (p>0.05). Therefore, it was concluded that application of SU following the ER protocol had better adhesive performance. However, this adhesive system featured intense transdentinal cytotoxicity to pulp cells, regardless of application protocol and dentin wettability.

Abstract: The aim of this study was to evaluate the bioactivity and cytocompatibility of simvastatin (SV) applied to MDPC-23 odontoblast-like cells. For this purpose, MDPC-23 cells were seeded in 96-well plates and submitted to treatments with 0.01 or 0.1 μM of SV for 24 h, 72 h or continuously throughout the experimental protocol. The negative control group (NC) was maintained in DMEM. Cell viability (MTT), ALP activity (thymolphthalein monophosphate), and mineralized matrix deposition (alizarin red) were analyzed at several time points. The data were submitted to ANOVA and Tukey's test (α = 0.05). Although cell viability was observed in the groups treated with SV, these groups did not differ from the NC up to 7 days. There was a reduction in cell viability for the groups treated with 0.1 μM of SV for 72 h, and submitted to continuous mode after 14 days. A significant increase in ALP activity occurred in the group treated with 0.01 μM of SV for 24 h, compared with the NC; however, only the group treated with 0.1 μM of SV in continuous mode reduced the ALP activity, in comparison with the NC. After 14 days, only continuous treatment with 0.1 μM of SV did not differ from NC, whereas the other experimental groups showed increased mineralized matrix deposition. Thus, it was concluded that low concentrations of simvastatin were bioactive and cytocompatible when applied for short periods to cultured MDPC-23 odontoblast-like cells.

Introdução:A efetividade de soluções antimicrobianas empregadas na descontaminação de próteses ainda é incerta.Objetivo:Avaliar a atividade antifúngica de soluções empregadas na descontaminação de próteses sobre o crescimento de Candida albicans.Material e método: Foram avaliados os produtos: Corega Tabs Branqueador(r) (S1), Hipoclorito de Sódio 1% (S2), Bicarbonato de Sódio 1% (S3), Peróxido de Hidrogênio 1% (S4), Digluconato de Clorexidina 0,12% - Periogard(r) (S5), Enxaguatório bucal a base de óleos essenciais - Listerine(r) (S6), e óleo essencial de Rosmarinus officinalis(alecrim) nas concentrações 1% (S7) e 2% (S8). A atividade antifúngica foi avaliada por meio da técnica de difusão em ágar e da determinação da curva de morte microbiana de amostras de C. albicans (ATCC 90028) na concentração 1,5×106 UFC/mL. Os testes foram realizados em triplicata e a análise estatística se deu pelos testes ANOVA Two-Way e Tukey, sendo adotado nível de confiança de 95%.Resultado:A média dos halos de inibição do crescimento, em milímetros, obtidos para os produtos foram: 0,0 (S1); 44,7 (S2); 0,0 (S3); 21,6 (S4); 10,0 (S5); 6,1 (S6); 0,0 (S7) e 2,4 (S8). Para curva de morte microbiana, todos os produtos apresentaram diferença estatisticamente significante (p<0,05) do grupo controle (cloreto de sódio 0,85%) e do grupo S3. Verificou-se crescimento fúngico inferior a 2×104 UFC/mL e acentuação na curva de morte microbiana após 30 minutos de ação, a exceção do grupo S3.Conclusão:As substâncias analisadas, a exceção do Bicarbonato de Sódio, possuem ação antifúngica frente C. albicans, podendo contribuir para higienização de próteses.

Introduction:The effectiveness of antimicrobial solutions employed in dental prosthesis decontamination is still uncertain.Aim: To evaluate the antifungal activity of cleaners used in the decontamination of dental prostheses on the growth of Candida albicans.Material and method: The evaluated products were: Corega Tabs(r) (S1), Sodium Hypochlorite 1% (S2), Sodium Bicarbonate 1% (S3), Hydrogen Peroxide 1% (S4), Chlorhexidine Digluconate 0.12% - Periogard (r) (S5), Mouthrinse based on essential oils - Listerine(r) (S6), essential oil from Rosmarinus officinalis (rosemary) at concentrations of 1% (S7) and 2% (S8). The antifungal activity of the products was evaluated by agar diffusion technique and the determination of microbial death curve of samples of C. albicans (ATCC 90028) in concentration 1.5 × 106 CFU/mL. The tests were performed in triplicate and statistical analysis was made by ANOVA Two-Way and Tukey tests, with the confidence level of 95%.Result:The average of the zones of inhibition growth, in millimeters, obtained for the products were: 0.0 (S1), 44.7 (S2), 0.0 (S3), 21.6 (S4), 10.0 (S5), 6.1 (S6), 0.0 (S7) and 2.4 (S8). Considering the determination of microbial death curve, all products showed a statistical difference (p<0.01) from control (0.85% sodium chloride) and S3 groups. Fungal growth less than 2×104 CFU/mL and an accentuation of the microbial death curve were observed after 30 minutes, with exception for S3 and control groups.Conclusion:The studied compounds, with the exception of Sodium Bicarbonate, have antifungal effect against C. albicans, which contribute for dental prostheses hygiene.